Frequently Asked Questions:

What kind of scratches does it remove?

Our product is designed to fill and make invisible the micro-scratches and oxidation marks present on the transparent layer of the paint (clear coat). If the scratch is so deep that it has reached the base of the paint or metal, it cannot be completely repaired, but its appearance will visibly improve.

How long does the effect last?

It depends on how you use and maintain the car, frequent washing and exposure to rain, sun or the elements affect the durability, but proper maintenance prolongs the result. With a generous hand and well spread, the protection lasts over 2 years. If you apply our ceramic sealant on top, it lasts more than 3 years.

What makes it different from other polishes?

Unlike many traditional waxes or sealants, our product has a self-leveling technology. It means it spreads evenly on its own, without streaks or smudges. You can also apply a thicker layer for a greater visual depth. The final shine will be more intense and long-lasting.

Can I apply it outdoors?

Yes, but it is important to do it under the right conditions, the ideal application temperature is between 10°C and 30°C; possibly with a humidity below 85%.

Avoid direct sun, strong wind or rain. A box, garage or otherwise a shaded and ventilated area is ideal.

Does it work on dull or damaged paints?

It works best on surfaces with a layer of clear still intact. However, on matte or single-layer paint, the aesthetic improvement and protection are still very visible.

For peeling or very degraded paint, it may be helpful to apply a second coat after 4 hours.

Does it work on plastics, headlights or chrome?

Yes, it can be used on:

✅Polycarbonate headlights (opaque or yellowed);

✅Chrome surfaces;

✅Painted plastics;

❌ It should not be used on glass.

How long does it have to dry?

4 hours for a first hardening. 24 hours before touching the surface or wetting it.

Of course, the more product is applied and the longer it will take for complete polymerization.

Is it a ceramic coating? Can they be used together?

No, it is not a ceramic coating, but a protective polish that gives depth and shine to the body. Absolutely do not apply it over an existing ceramic!

Instead, you can apply a ceramic coating over our product, after waiting at least 48 hours.

If I don't like the result, can I remove it?

Yes, and it's very easy! In the first 2-3 minutes you can immediately pass our degreaser and remove everything even before it dries.

After a few hours: If the product has already started to harden, gently sand with wet 2000 grit sandpaper, clean and reapply.

When can I wash the car?

48 hours after application. !Attention! Absolutely avoid roller car washes: they ruin both the original paint and our treatment!!

✅ Prefer hand washing, with a pressure washer or in a touchless system.

How much product should I use?

The key is to keep the microfiber cloth always moist during application.

There's no need to overdo it: the important thing is not to work dry. Keep the bottle handy and add a few drops as soon as you start to feel the cloth pulling (friction with the body).

How much pressure should I use in application?

Very light. Roll out the product in a linear motion, palm of hand flat, without insisting. No need to rub hard.

Can it be used on sunburned surfaces?

Yes, in fact: it is particularly effective on roofs and hoods with UV damage.

If the area is very compromised, repeat the application after 4 hours for a more covering effect.

I got the wrong area, how can I fix it?

In the first 1-2 minutes: Gently wipe with the damp cloth and redistribute.

You have about 3 minutes to touch up. Afterwards, don't touch again.

If the error is serious, use the degreaser within 5 minutes and start again.

Can I polish or sand before or after?

First: If you have experience, a light sanding with wet 2000 grit improves adhesion and results.

After: If you want to polish, wait at least 48 hours.